Photo Gallery

Basement Waterproofing - Basement Waterproofing



Basement Waterproofing
Previous Photo
Next Photo
We installed a full perimeter WaterGuard system on all exterior walls. The concrete floor was removed roughly 10 to 12 inches from the foundation wall, allowing for the WaterGuard subfloor system to be installed including filter cloth and a bed of stone. The concrete floor was put back together after the system was installed and drained into the sump pumps. In the location of the existing sump pump, we cleaned out the pit and installed an Ultra Battery Back-Up assembly including a new Zoeller M 53 submersible pump and we ran it through the foundation wall to the exterior, tying into an IceGuard. We installed a SuperSump in the existing sump and run the plumbing to the same area on the exterior into an Ice Guard. A Cleanspace wall liner was installed to flash water from the small cracks in the poured concrete foundation into the WaterGuard System. Drainage Matting was installed on top of the ledge to allow water to flow to the lowest point.

our service area

We serve the following areas

Service Area
Free Quote